# Changelog

## v2.0.1 (Current) - 28/12/2022

- Renamed `Material` panel to `Materials`
- Fixed upper limit of laser pitch control
- Added cruise safety chip
- Added lasers safety chip

## v2.0.0 - 01/12/2022

- Added EGOTech logo decal
- Removed chamber numbering plates to give way to enhancers
- Added four more T2 generators, 40 T1 and 16 T2 enhancers, increasing power generation to 63,000eps
- Added 22 more heat sinks
- Added six more radiator bases and 12 extensions
- Replaced sweeping mining lasers with two automated rotating drills with four mining lasers each
- Swapped center rangefinder with lower rangefinder to be in line with the drills
- Moved material scanner lower inside the ship to be more in line with the center rangefinder
- Added 120 more batteries
- Moved collectors and added four extra collectors behind the drills
- Added windows to where collectors used to be
- Updated dynamic generator script to take into account lasers
- Added eight maneuver thrusters around drills
- Remove belt and atmosphere furnaces
- Increased default min generator rate to 90
- Adjusted maximum backup rods to 48
- Added avoidance safety chip to disable avoidance when laser drills are not in starting position
- Moved a couple of guide rangefinders onto drill, disabled when drills are turned on
- Removed forward thrust total chip
- Split side thruster blocks into three blocks each for better balance
- Changed other rear thruster groupings

## v1.1.1 - 27/05/2022

- Replaced speedometer by MoriWatari with new speedometer
- Removed fast travel core
- Added asteroid belt and moon atmosphere furnaces
- Added 24 spare T2 fuel rods on racks
- Increased max propellant to 108,000,000

## v1.1.0 (Ship Shop Version) - 27/05/2022

- Painted thrusters black
- Added meter upgrade to basic crafting bench
- Added 10 heat sinks
- Reduced radiators to four bases and eight extensions
- Replaced all `RadiationRate` panels with `HeatTransferRate`
- Added `StoredHeat` panels
- Moved `Canopy` button from pilot right console to left console
- Piped mining lasers in case of heat generation in the future

## v1.0.4 - 16/02/2022

- Fixed sweeping of lasers
- Changed material of some beams which was mistakenly changed back to Bastium
- Painted all thrusters' nozzles to red

## v1.0.3 - 04/01/2022

- Added reset buttons for timer, odometer and avoids as current method does not work with duplicate panels
- Added `Lights` and `Doors` buttons on the pilot left console as well
- Swapped `NavGrid` `Up` and `Down` button positions
- Moved some plates that was positioned wrongly below the ship

## v1.0.2 - 31/12/2021

- Removed `nName`, `nX`, `nY` and `nZ` panels from navigation co-pilot console as duplicates interfere with operation

## v1.0.1 - 21/12/2021

- Added Reset ISAN button

## v1.0.0 - 20/12/2021

- Initial release